Operation details of naman yankakken a amfani

1. Strictly check whether the wiring is correct according to the wiring diagram of the frozen meat slicer and mutton slicer, whether the manual control of the jog and stop control is correct and reliable, and check whether the running direction of the main motor is correct.

2. Sai a saka mai a cikin akwatin rage gear ɗin motsi, matakin mai ya kamata a ajiye shi a saman jirgin sama na tsutsa, kuma a saka tankin mai na ruwa tare da mai mai hana ruwa mai hana ruwa zuwa layin matakin mai. .

3. Connect all the oil pipes according to the working principle, and only after confirming that there are no abnormal phenomena such as obstructions in the system of each component, can start the frozen meat slicer and mutton slicer for a test run.

4. Meat food must be frozen and hardened moderately, generally above “-6 ℃”, and should not be over-frozen. If the meat is too hard, it should be thawed first, and the meat should not contain bones to avoid damage to the blade.

5. Ana daidaita kauri na yankan nama ta hanyar ƙara ko rage gasket a bayan ruwa. Kafin amfani, da fatan za a sauke ɗan dafa abinci a cikin ramin zamewa don rage gogayya.

6. The knife handle in the right hand must be moved vertically up and down, and cannot be broken to the left (the direction of the meat block) during the movement, which will cause the knife to deform.

7. If the knife slips and cannot hold the meat after cutting a few hundred pounds, it means that the knife has stopped, and it should be sharpened.